Thread on Versa-Torch Handle for brazing, soldering and other soft flame applications. Tip length is 10 inches (254 mm) with screw-on LT103 drill size 63 tip head. Other screw-on tip head available depending on fuel gas - LT Series for Acetylene and NE Series for alternate fuel gases.
Recommended for use with AT61 Mixer Tube for heating up to 16600 BTU using alternate fuels.
Versatility in tip end selection depending on flame desired. Recommended for use with Threaded Tip Tube AT60 for acetylene. This tip head has brazing capacity of 5/8" - 1" (16 mm - 25 mm) copper pipe diameter.
Thread on Versa-Torch Adapter for brazing, soldering and other soft flame applications. Recommended for use with Adapter AT40 for acetylene and AT41 for alternate fuels. Tip length is 5 inches (127 mm) with screw-on A3 drill size 63 tip head for acetylene. Other screw-on tip head available for alternate fuel.
Versatility in tip end selection depending on flame desired. Recommended for use with Threaded Tip Tube AT60 for acetylene. This tip head has brazing capacity of 1/2" - 3/4" (12 mm - 19 mm) copper pipe diameter.
Versatility in tip end selection depending on flame desired. Recommended for use with the AT61 for alternate fuels. This tip head has brazing capacity of 7/8" - 1-5/8" (22 mm - 41 mm) copper pipe diameter.
Injector or mixer tube that threads on a Versa-Torch™ Handle to run flexible twin flame tips and Quickbraze™ single-flame and "C" twin flame tips. Recommended for propane, natural gas and propylene.
Recommended for use with AT60 Mixer Tube for heating up to 16080 BTU using acetylene.
Thread on Versa-Torch Handle for brazing, soldering and other soft flame applications. Tip length is 6 inches (152.4 mm) with screw-on LT103 drill size 63 tip head. Other screw-on tip head available depending on fuel gas - LT Series for Acetylene and NE Series for alternate fuel gases.
Versatility in tip end selection depending on flame desired. Recommended for use with Threaded Tip Tube AT60 for acetylene.. This tip head has brazing capacity of 3/4" - 1-1/2" (19 mm - 38 mm) copper pipe diameter.