MIG [Wire] Welding
- Easiest process to learn
- Welds light-gauge to thick material
- Great for quick repairs around the farm or ranch
|
Millermatic® 140
Auto-Set™ |
Millermatic® 180
Auto-Set™ |
Millermatic® 212
Auto-Set |
Millermatic® 252 |
| Input Voltage |
115 volts |
230 volts |
200 (208) 230 volts |
200 (208)/ 230 volts
230/460/575 volts
|
Material Thickness
(Single pass max.) |
3/16"  |
5/16"  |
3/8"  |
1/2"  |
| Weight |
60 lbs |
72 lbs |
177 lbs |
207 lbs |
| Rated Output |
90 Amps, 18VDC @ 20% duty cycle |
135 Amps, 22.5VDC @ 30% duty cycle |
160 Amps, 24.5VDC @ 60% duty cycle |
200 Amps, 28VDC @ 60% duty cycle
250 Amps, 28VDC @ 40% duty cycle |
| Welding Aluminum |
Add optional Spoolmate™ 100 Series spool gun |
Add optional Spoolmate™ 100 Series spool gun |
Add optional Spoolmatic 30A spool gun for aluminum welding. |
Add optional Spoolmatic 30A spool gun or any Miller push-pull gun. Easy to install and simply pull the trigger to switch from spool gun, push/pull gun, or the MIG gun |
| Product Highlights |
- For beginners, light-duty or occasional users.
- Smooth low-end arc for welding thin metals without burn-through and enough power to provide good penetration on moderately thick metals.
- Auto-Set™ makes welding easy – set the wire diameter, set the material thickness and start welding!
|
- For light-duty users who need a little more power.
- Uses 230 V input power to weld thicker materials.
- Features Wire Feed Speed Tracking for automatic adjustment so you can stay in the Sweet Spot even when voltage is changed.
- Easily portable with the extra power you need.
- Auto-Set™ makes welding easy – set the wire diameter, set the material thickness and start welding!
|
- Best high- and low-end control for frequent users.
- 15’ gun cable for extended reach.
- 7-tap output control which provides wider welding range with superior performance throughout the entire range.
- Holds 8” or 12” wire spools.
|
- Infinite voltage and wire feed speed controls give you the ability to fine-tune voltage and wire feed speed settings.
- Direct Connect for any Miller push/pull or spool gun - makes it easy to switch between welding steel and aluminum.
- Patented Auto-Gun Detect recalls voltage, wire feed speed and timers for gun in use.
- Line voltage compensation keeps welding output consistent, even if input power varies by +/- 10%
|
| |
See All MIG Products » |
To get a product recommendation, use our SmartSelector™ »
