Miller Electric

Protective Cover (Dynasty 200)

Heavy-duty, water and mildew resistant. Protects and maintains the finish of the welder.

Universal Cart and Cylinder Rack

Accommodates gas cylinder up to 56 in (142.2 cm) high measuring 6 to 9 in (15.2 to 22.8 cm) in diameter. Provides Storage for auxiliary items such as electrodes, helmets gloves, etc.

WELDCRAFT AIRCOOLED,150 A,25 ft

Contractor Kit with Foot Control

Kit includes: Protective Carrying Case with RFCS-14HD foot control, Regulator, Electrode Holder, Work Clamp, Gas Hose, AK-2 Torch Accy kit, Gas hose coupler, DB1725R TIG torch, International Style Torch Adapters.

Contractor Kit with Finger Tip Control

Kit includes: Protective Carrying Case with RCCS-14 Finger Tip control, Regulator, Electrode Holder, Work Clamp, Gas Hose, AK-2 Torch Accy kit, Gas hose coupler, DB1725R TIG torch, International Style Torch Adapters.

WELDCRAFT WATERCOOLED, 250 A, 25 ft

Coolmate™ 3 115 VAC, 50/60 Hz

For use with water-cooled torches rated up to 600 amps. Runs on 115 VAC. Unique paddle-wheel indicator, external filter and easy-fill spout. 3 gallon capacity.

Low-Conductivity Antifreeze/Coolant

Sold in cases of four 1-gallon recyclable plastic bottles. Recommended for TIG and HF applications. Miller coolants contain a base of ethylene glycol and deionized water to protect against freezing to -37°F (-38°C) or boiling to 227°F (108°

RFCS-14 Remote Foot Control (14-pin plug)

Foot pedal provides remote current and contactor control . Includes 20 ft (6 m) cord and 14-pin plug.

RCCS-14 Remote Contactor and Current Control (14-pin plug)

North/South rotary-motion fingertip control fastens to TIG torch using Velcro® straps. Includes 26.5 ft (8m) control cord. (For all Miller solid-state power sources after serial number JK674521.)

RMLS-14 Remote Switch (14-pin plug)

Momentary and maintained-contact rocker switch for contactor control. Push forward for maintained contact and backward for momentary contact. Includes 26.5 ft(8 m) cord and plug. (For all Miller solid-state power sources after serial number JK674521.)

RMS-14 Remote On/Off Control (14-pin plug)

Momentary-contact switch for contactor control. Rubber-covered pushbutton dome switch ideal for repetitive on-off applications. Includes 26.5 ft (8 m) cord and 14-pin plug. (For all Miller solid-state power sources after serial number JK674521.)

RHC-14 Remote Hand Control (14-pin plug)

Miniature hand control for remote current and contactor control. Dimensions: 4 x 4 x 3-1/4 in (102 x 102 x 82 mm). Includes 20 ft (6 m) cord and 14-pin plug.

Extension Cords for Remote Controls (24 VAC Wire Feeders), 25 ft

For 14-pin remote contactor and voltage controls/24 VAC wire feeders. Provides 14-pin, 24 VAC, plug to a 14-pin socket. (Not for XR-M, Optima™, or 60M series feeders.)

Extension Cords for Remote Controls (24 VAC Wire Feeders), 50 ft

For 14-pin remote contactor and voltage controls/24 VAC wire feeders. Provides 14-pin, 24 VAC, plug to a 14-pin socket. (Not for XR-M, Optima™, or 60M series feeders.)

Extension Cords for Remote Controls (24 VAC Wire Feeders), 75 ft

For 14-pin remote contactor and voltage controls/24 VAC wire feeders. Provides 14-pin, 24 VAC, plug to a 14-pin socket. (Not for XR-M, Optima™, or 60M series feeders.)

International/Tweco® Adapter

A one-piece adapter which has an International-style male plug (to power source) on one end and a female Tweco receptacle (for weld cable connection) on other end.

International/Cam-Lok Adapter

A one-piece adapter which has an International-style male plug (to power source) on one end and a Cam-Lok receptacle (for weld cable connection) on other end.