Miller Electric

RCCS-14 Remote Contactor and Current Control (14-pin plug)

North/South rotary-motion fingertip control fastens to TIG torch using Velcro® straps. Includes 26.5 ft (8m) control cord. (For all Miller solid-state power sources after serial number JK674521.)

Low-Conductivity Antifreeze/Coolant

Sold in cases of four 1-gallon recyclable plastic bottles. Recommended for TIG and HF applications. Miller coolants contain a base of ethylene glycol and deionized water to protect against freezing to -37°F (-38°C) or boiling to 227°F (108°C). Also co

RMLS-14 Remote Switch (14-pin plug)

Momentary and maintained-contact rocker switch for contactor control. Push forward for maintained contact and backward for momentary contact. Includes 26.5 ft(8 m) cord and plug. (For all Miller solid-state power sources after serial number JK674521.)

RMS-14 Remote On/Off Control (14-pin plug)

Momentary-contact switch for contactor control. Rubber-covered pushbutton dome switch ideal for repetitive on-off applications. Includes 26.5 ft (8 m) cord and 14-pin plug. (For all Miller solid-state power sources after serial number JK674521.)

RFCS-14 HD Foot Control (14-pin plug)

Heavy-duty foot pedal current and contactor control provides increased stability and durability. Reconfigurable cord can exit the front, back or either side of the pedal. Includes 20ft(6m) cord and plug.

ADAPTER,TORCH-INTNL STYLE WATER(#18,20)

Automation Interface Connection Kit

Provides control of power source welding parameters through a 28 pin receptacle. The 28 pin receptacle replaces the standard 14 pin receptacle and requires a PLC controller to operate the power source. Ideal for automated equipment integration.

CABLE,EXTENSION 24 VAC 14 PIN 8C 50 FT

CABLE,EXTENSION 24 VAC 14 PIN 8C 80 FT

RHC-14 REMOTE HAND CONTROL W/CABLE 20 FT

Miniature hand control for remote current and contactor control. Dimensions: 4 x 4 x 3-1/4 in (102 x 102 x 82 mm). Includes 20 ft (6 m) cord and 14-pin plug.

RHC-14 REMOTE HAND CONTROL W/CABLE 100 FT

Miniature hand control for remote current and contactor control. Dimensions: 4 x 4 x 3-1/4 in (102 x 102 x 82 mm). Includes 100 ft (6 m) cord and 14-pin plug.

WELD CURRENT SENSOR

Detects when work clamp is not connected and prevents expensive damage to disconnect devices and input power cord and wiring.

310 A Water-Cooled Torch Kit

Includes 25 ft Weldcraft® torch, cable cover, torch accessory kit, Smith® regulator/flowmeter, 12 ft rubber gas hose, water-cooled Dinse torch adapter, and 12 ft weld lead with clamp and Dinse connector.

Runner Cart

Designed to accommodate the Dynasty or Maxstar 350 or 700 power sources and the Coolmate 3.5 Cooler. Cart features: single cylinder rack, foot pedal holder, 3 cable/torch holders and 2 filler holders.

Coolmate™ 3.5

Designed to integrate with the Dynasty and Maxstar 350 and 700 power sources. For use with water-cooled torches rated up to 600 amps. 3.5 gallon capacity.

WIRELESS FOOT CONTROL AND 14 PIN RECEIVER

Improves productivity, eliminates clutter and cord tangles in the work area. Eliminates cord failure and associated downtime/repair costs and extends the welding range without adding cord extensions.

Wireless Hand Control and 14 Pin Receiver

Improves productivity, eliminates clutter and cord tangles in the work area. Eliminates cord failure and associated downtime/repair costs and extends the welding range without adding cord extensions. Designed for tig, stick, and volt sensing wire feeder

WELDCRAFT WATERCOOLED, 310 A, 25ft