Longest lasting cutting tip for dependable performance. Cuts up to 1 1/4 in. (32 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Longest lasting cutting tip for dependable performance. Cuts up to 2 in. (51 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Longest lasting cutting tip for dependable performance. Cuts up to 4 in. (102 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Longest lasting cutting tip for dependable performance. At 9 in. long, this extra-long cutting tip is used for hard-to-reach areas, cutting up to 4 in. (102 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Longest lasting cutting tip for dependable performance. Cuts up to 8 in. (203 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Longest lasting cutting tip for dependable performance. Cuts up to 12 in. (305 mm). For use with all heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

For edge preparation, removal of welds or gouging cracked metals with a gouging capacity of 3/8 in. (10mm) wide and 1/4 in. (6mm) deep. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

For edge preparation, removal of welds or gouging cracked metals with a gouging capacity of 1/2 in. (13mm) wide and 3/8 in. (10mm) deep. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Longest lasting cutting tip for dependable performance. Cuts heads of bolts and rivets and can be used in a 180 degree hand cutting torch to cut out boiler tubes. Works equally as well for cutting risers and bulk heads. Cuts up to 1-1/2 in (38mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

For removing old welds or cracks, veeing and groove cutting with a gouging capacity of 5/16 in. (8mm) wide and 1/8 in. (3mm) deep. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

For removing old welds or cracks, veeing and groove cutting with a gouging capacity of 3/8 in. (10 mm) wide and 1/4 in. (6 mm) deep. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Cuts up to 3/8 in. (10 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Cuts up to 5/8 in. (16 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Cuts up to 1-1/4 in. (32 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Cuts up to 2 in. (51 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Cuts up to 4 in. (102 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Used for dirty or coated metals, cutting up to 1-1/4 in. (32 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Used for dirty or coated metals, cutting up to 4 in. (102 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Used for dirty or coated metals, cutting up to 8 in. (203 mm) thick metal. For use with all heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Used for dirty or coated metals, cutting up to 12 in. (305 mm) thick metal. For use with all heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Longest lasting cutting tip for dependable performance. Used for heavy pre-heating, cutting up to 3/8 in. (10 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Longest lasting cutting tip for dependable performance. Used for heavy pre-heating, cutting up to 5/8 in. (16 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Longest lasting cutting tip for dependable performance. Used for heavy pre-heating, cutting up to 1-1/4 in. (32 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Longest lasting cutting tip for dependable performance. Used for heavy pre-heating, cutting up to 2 in. (51 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Longest lasting cutting tip for dependable performance. Used for heavy pre-heating, cutting up to 4 in. (102 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Longest lasting cutting tip for dependable performance. Used for heavy pre-heating, cutting up to 8 in. (203 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Longest lasting cutting tip for dependable performance. Used for heavy pre-heating, cutting up to 12 in. (305 mm) thick metal. For use with all heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Longest lasting cutting tip for dependable performance. Used for heavy pre-heating, cutting up to 14 in. (354 mm) thick metal. For use with all Gas Axe™ hand cutting torches.

Longest lasting cutting tip for dependable performance. Used for heavy pre-heating, cutting up to 18 in. (457 mm) thick metal. For use with all Gas Axe™ hand cutting torches. 

Longest lasting cutting tip for dependable performance. Used for heavy pre-heating, cutting up to 20 in. (508 mm) thick metal. For use with all Gas Axe™ hand cutting torches. 

Longest lasting cutting tip for dependable performance. Used for medium preheating, cutting up to 3/8 in. (10 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Longest lasting cutting tip for dependable performance. Used for medium preheating, cutting up to 5/8 in. (16 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Longest lasting cutting tip for dependable performance. Used for medium preheating, cutting up to 1 1/4 in. (32 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Longest lasting cutting tip for dependable performance. Used for medium preheating, cutting up to 2 in. (51 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Longest lasting cutting tip for dependable performance. Used for medium preheating, cutting up to 4 in. (102 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Longest lasting cutting tip for dependable performance. Used for medium preheating, cutting up to 8 in. (203 mm) thick metal. For use with all heavy-duty combination torches, heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Longest lasting cutting tip for dependable performance. Used for medium preheating, cutting up to 12 in. (305 mm) thick metal. For use with all heavy-duty hand cutting torches, Gas Axe™ hand cutting torches and machine torches SC770 and SC772A.

Delivers large volume of heat quickly for bending, straightening, shrinking, forming and other heating applications. Use with Hand Cutting Torches or Machine Torches only. Compatible with SC175 to SC365 and Gas Axe™.