Multimatic® 255 Multiprocess Welder 208-57 | MillerWelds

Multimatic® 255 Multiprocess Welder w/ EZ-Latch™ Dual Cylinder Running Gear & TIG Kit - 208-575V

951768
DC TIG, MIG, Pulsed MIG, flux-cored, and stick welder featuring Auto-Set™ Elite. 208-575 V input power.
Compare

TIG Package with Dual Cylinder Running Gear Package
951768

Single Cylinder Running Gear Package
951767

Machine Only
907728

Download the most up-to-date software for your welder! View Available Updates >>
Which product is right for you? Find out here.

Features

What's Included

  • Power source with 10 ft. (3 m) industrial power cord
  • 15 ft. (4.5 m) 250-amp MDX™-250 MIG gun w/Bernard® AccuLock™ S consumables for .035/.045 in. (0.9/1.2 mm) wire
  • 10 ft. (3 m) cable w/electrode holder & 50 mm Dinse-style connector
  • 10 ft. (3 m) work cable w/clamp & 50 mm Dinse-style connector
  • Flow gauge regulator and gas hose for argon or AR/CO2 mix
  • .035/.045 in. (0.9/1.2 mm) reversible drive rolls
  • Extra contact tips
  • Material Thickness Gauge
  • EZ-Latch™ dual cylinder running gear with elevated gun and cable rack
  • Multimatic 255 TIG kit
  • Two chains to secure gas cylinders
MDX-250 MIG Gun w/ AccuLock™ S consumables
AccuLock liner loads from the front and locks at the front and back to insure proper alignment for flawless wire feed path. New rubber overmold and ball -and-socket handle design improves grip and reduces welder fatigue. New Industrial Bernard AccuLock™ S contact tips provide superior Spray and Pulsed MIG arc performance.
Versatility
Multiprocess Capabilities of MIG, Pulsed MIG, Stick (6010), DC Lift Arc TIG and DC Pulsed TIG
Easy-to-understand interface
7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time
Pulsed MIG welding delivers higher quality
Lower heat input for less distortion on thin materials, less spatter minimizes post weld grinding and rework allowing more welding time. Perform welding applications that couldn’t be done in the past
Auto-Set™ Elite
Offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.
Program mode allows easy save and recall of favorite weld settings
Deliver more productivity, consistent quality by welders of all skill levels by using prequalified weld settings. Minimize supervisor need to intervene.
Portability - Machine only weighs 84 lb
Weight is reduced by more than 50 percent compared to transformer welding machines
EZ-Latch™ Dual Cylinder Rack with Elevated Gun and Cable Rack
Quickly disconnects from the machine and enables portability. Dual cylinder rack and storage compartment. Allows operator to easily store two gas cylinders. Includes elevated gun and cable rack to keep cables off the floor and tangle free.
Generator Compatible
The Multimatic 255 will be able to operate and provide full output when powered by generators with 12000 Watt (12K) output or higher. Limited output will occur when used with smaller generators.
6010 Stick Electrode Capability
Superior Stick arc performance even on the difficult-to-run electrodes like E6010.
Locks and Limits
Provides control of the weld parameter ranges minimizing deviations from the welding procedure specifications (WPS).   Learn More
USB Port
Provides the ability to easily update software, back-up settings and transfer saved weld programs from one unit to the next.

Not Included

  • Weld leads
  • Shielding gas (for welding with solid wire [GMAW])
  • Flux cored drive rolls (for welding with flux cored wire [FCAW])
  • Push-Pull Gun (for welding aluminum)
  • Spool Gun (for welding aluminum)
  • Welding wire
  • Personal safety products (helmet, gloves)

Specifications

Processes

Stick (SMAW)
TIG DC (GTAW-DC)
Flux Cored (FCAW)
MIG (GMAW)
Multiprocess

General Specifications

Title Multimatic® 255 Multiprocess Welder w/ EZ-Latch™ Dual Cylinder Running Gear & TIG Kit - 208-575V
Industries Interests Racing
Farm and Ranch
Auto Repair
Manufacturing
Construction and Fabrication
Amperage 5 A - 350 A
Material Thickness Mild Steel 22 ga. - 1/2 in. (MIG)
Mild Steel 24 ga. - 3/8 in. (TIG)
Mild Steel 16 ga. - 5/16 in. (Stick)
Aluminum 18 ga. - 1/2 in. (MIG)
Weldable Metals Aluminum
Stainless Steel
Steel
Input Voltage 208 V
220/230/240 V
460/480 V
575 V
Input Phase 1-Phase
Input Hz 50/60 Hz
Input Amperage 34.7
Current Type DC
Max Open Circuit Voltage 81 VDC
Portability Handle(s)
Running Gear / Cart (Standard)
Weld Output CC / CV
Applications Aluminum Welding
Fabrication
Mobile Fabrication & MRO
Welding Education and Training
Warranty 3 Years
Miller's True Blue Warranty

Accessories

Consumables

Resources

Videos

Reviews & Ratings

Question & Answers